Accessories
We are offering multiple accessories for each of our fans such as reverse damper for domestic fans, cover for IDEA fans mounted on the ceiling or a reduction from 125 to 150 mm. For the safe voltage domestic fans it is necessary to use a transformator/power supply.
In the event of water condensation in the ventilation duct and when a moisture is created there, we recommend using our condensate sump to drain this condensate out.
Industrial fans have a high output and it is often necessary to regulate this output. In our offer you will find speed controllers for these purposes.
Quick navigation
Domestic fans
ADF
regulation grille
ADF is regulation grille that helps you control the air flow of the fan. It is made of durable ABS plastic and is suitable for all of our domestic KLIMATOM fans (PRIMO, PRIMO base, ENTER, IRIS, ARES, SOLO and IDEA).
It also increase the static pressure by about 10 Pa. This makes the fan even more powerful and works with higher efficiency even in longer ventilation ducts compared to a fan without ADF.
ADF dimensions: 23 and 27 mm
Available diameters: Ø100 and Ø125 mm
BDS
back shutter with transparent foil
BDS is a back shutter made of durable ABS plastic and is suitable for all of our domestic KLIMATOM fans (PRIMO, PRIMO base, ENTER, IRIS, ARES, SOLO and IDEA).
Back shutter prevents cold and poluted air from coming back to the room and prevents insect from entering the ventilation duct when the fan is turned off.
BDS dimensions: 23 and 27 mm
Available diameters: Ø100 and Ø125 mm
KI
IDEA ceiling cover
This cover for IDEA domestic fans is made of durable ABS plastic and serves to aesthetically cover problems of improperly cleaned outlet opening. This usually means a poorly cleaned plasterboard/drywall.
The assembly is performed on the fan base (IDEA base) in the already prepared holes. The product can also be mounted on previously installed fans.
Outer diameter: Ø188 mm
Height: 15 mm
PR
reduction for different sizes of ventilation duct
Reduction for IDEA 125 and PRIMO 125 domestic fans is made of durable ABS plastic and is used to reduce 125 mm fans to 150 mm ventilation ducts. Thanks to the design and construction of these fans, they still have sufficient power and static pressure for such solution.
By fitting this reduction to the fan, the diameter of the fan outlet is precisely centered in the ventilation duct thus ensuring trouble-free assembly of the products.
Outer diameter: Ø148 mm
Inner diameter: Ø123 mm
Height: 11 mm
Industrial fans
RN, RNT
speed controller in two versions
The rotary controller (RN) and rotary button controller (RNT) are used to control the speed of industrial fans. The RN 1A version is used for motors up to a maximum power of 170 W and the RNT 2A is designed for motors with a maximum power up to 370 W.
The RNT controller is equipped with a red indicator and its switching on and off is made by pushing the main control button on the controller body. The RN controller regulates the operation of the fan by simply turning it to the appropriate position.
Paramaters RN 1A: 230V/50Hz | 0,1 to 1 A | 20 to 170 W | 0,24 kg
Parameters RNT 2A: 230V/50Hz | 0,2 to 2 A | 40 to 370 W | 0,24 kg
Ventilation duct
KJ
condensate sump
The condensate sump is used for the removal of condensate, which can arise during the steam removal from the kitchen hood or ventilation of the bathroom etc. The condensate collects in places where there is a large thermal gradient. In this case the pipe isolation is ineffective.
The condensate sump should be placed in a plastic ventilation duct with a diameter of 104 mm or 125 mm depending on the version. The subsequently formed condensate is collected inside the collector and then the condensate is drained from the prepared 9 mm hole into the waste by a small tube.
Available diameters: Ø104 and Ø125 mm
Height: 60 mm
